Camera Model

Flare 2KSDI

Output Modes

2K, 1080p, 1080i, 720p, up to 60 fps

Optical Format

Approx. 2/3" (2K: 12.7mm diagonal, 1080p/i: 12.1mm diagonal, 720p: 8.1mm diagonal)

Sensor Type

CMOS w. global electronic shutter

Sensor Options

Color (Bayer), monochrome or Near IR enhanced monochrome

Dynamic Range

60 dB (10 Stops)

Output Interface

Single-Link 3G/HD-SDI (two outputs: optional OSD overlay on SDI1, clean output on SDI2)

Output Format

10-bit 4:2:2(Y’Cb’Cr’), 4:4:4 (RGB) or RAW (Bayer)

Exposure Control

Automatic (AEC) or manually adjustable

Luma Control

Gamma, master pedestal, white clipping offset with adjustable knee function

Color Control

Color matrix, RGB offsets, saturation adjustment, Preset/Auto/Tracking White Balance

Synchronization

Tri-level sync input (BNC)

Camera Configuration

RS-485, use handheld remote for OSD or use PC software, cables up to 1000 ft

Dimensions

63.5 mm x 63.5mm x 44.1 mm

Lens Mount

C-mount, Active EF-mount

Camera Mounting Points

4x 1/4"-20, 8x #8-32

Weight

310g

Power Requirements

4.5W, 10-19V DC via Hirose 12-pin

Operating Temperature

0°C to 50°C, 20-85% humidity (non-condensing)

Storage Temperature

-40°C to 85°C, 10-90% humidity (non-condensing)

Part Number

Sensor Type

2KSDI

Color

2KMSDI

Monochrome

2KNSDI

Near IR Enhanced Monochrome